GUANGDONG XWELL TECHNOLOGY CO., LTD.
Add to Cart
Temperature Controlled Battery High Current Short Circuit Tester
The short circuit tester adopts PID automatic control to simulate the external short circuit of the battery, meeting the standards of UL1642,UN38.3,IEC62133,GB/T18287,GB/T 31241-2014, etc. The red copper contactor is used as the switch element and the thermal relay as the protection device. When the circuit breaker is closed, the circuit of the tested battery is short circuited, and the strong short-circuit current passes through the whole circuit. After data processing, the battery surface temperature, voltage and current signals detected by Hall element are sent to the computer side, and the software continuously records the battery voltage, current and surface temperature changes. The short circuit tester must conform to the resistance of the whole circuit (including circuit breaker, wire and connecting device) of 80 ± 20 m Ω, and each circuit can withstand the short circuit current with a peak value of 1000A/2000A.
Short circuit stop mode can be selected: 1. Short circuit time; 2. Battery surface temperature;
Related standard
GB 31241-2014 safety requirements for lithium ion batteries and batteries for portable electronic products
High temperature external short circuit
After the battery is fully charged according to the specified test method, it is placed in the environment of 55 ℃± 5 ℃. After the battery temperature reaches 55 ℃± 5 ℃, it is placed for another 30min. Then connect the positive and negative terminals of the battery with wires, and ensure that all external resistance is 80 m Ω± 20 m Ω. The surface temperature of the battery was monitored during the test.
Acceptance standard: the battery shall be free from fire and explosion, and the maximum temperature shall not exceed 150 ℃
Specification
| Impulse voltage | AC 1kv/1.2-50μs(maximum value)1min |
| DC response time | ≤5μs |
| Voltmeter | Measuring voltage: 0-100V; Display accuracy: F.S ± 0.5% RDG ± 1digit; |
| Maximum short circuit current | 1000A or 2000A selectable |
| Ammeter | Measuring current: 0-1000A/2000A; Display accuracy: F.S ± 0.5% RDG ± 1digit; |
| temperature range | RT+10℃ ~ +130℃(adjustable) |
| Temperature fluctuation | 0.5℃ |
| Power Supply | AC 220V10% 50HZ |