GUANGDONG XWELL TECHNOLOGY CO., LTD.
Add to Cart
5V3A512 Channel Cylindrical Battery Capacity Tester Analyzer Grading Machine
Significant power saving effect
According to the actual measurement, the power consumption of S2 ~ 4 series equipment is more than 40% less than that of traditional equipment when charging, the comprehensive power saving rate is more than 60%, and the power consumption is more than 60%, which saves a lot of costs for battery manufacturers.
The temperature rise of equipment is obviously reduced
The temperature rise of equipment in operation is only 1 / 4 or lower than that of traditional equipment. When using this kind of equipment, especially in summer, the environmental temperature of customer's production site is no longer the same as that of sauna room, which makes workers reluctant to stay. The accuracy of capacity sharing is more guaranteed, and the failure rate of equipment is lower.
Excellent power quality
At the AC input side, the bidirectional converter power supply based on high frequency PWM rectifier technology is used to realize the bidirectional conversion from AC to DC and from DC to AC. The current waveform injected into the power grid is sine wave, the harmonic distortion rate is less than 5%, and the power factor is greater than 0.99;
▲ Battery Tester with recaperate energy during discharger cycle functiont equipment can completely avoid the situation of huge fines or even no start-up caused by the unqualified power quality in the power quality inspection of the battery manufacturing enterprise.
Specification:
| Channel voltage and current | 5V/3A |
| Channel number | 512 Channnels |
| Parallel unit number per channel | 1 |
| Input AC type | 3 phase AC380V ±10%/50Hz |
| Maximum input power | 14KW |
| Noise | ≤65dB |
| AC power supply wiring mode | Three-phase five wire connection |
| The power factor of power supply | ≥0.99(The load power is more than 30% of rated power) |
| Total current distortion rate | THD≤5% |
| Constant voltage setting range | Charging:0.02V~5V |
| Minimum discharge voltage | Discharging:1V~5V |
| Measuring range | 0V~5V |
| The voltage resolution | 0.1mV |
| The voltage resolution | 0.1mV |
| Charging current setting range | 0.02A~3A |
| Discharging current setting range | 0.02A~3A |
| Measuring range | 0A~3A |
| Single channel maximum output power | 30W |
machine picture
